Huawei MateBook E - Connecting a USB Mouse, Printer, or Other Peripheral Device

Connecting a USB mouse, printer, or other peripheral
device
Use the USB-C port on your computer to connect a USB mouse, printer, scanner, smartphone,
hard drive, or other peripheral device.
Connecting a USB device
1 Plug the USB cable into the USB-C port on your MateDock2.
2 If the USB device requires a power supply, plug it in before powering it on.
3 The first time you connect a new USB device, your computer will automatically install any
drivers that are required.
Viewing connected devices on your computer
1 Click
in the lower-left corner of the screen to open the Start menu.
2 Click > .You can view connected USB devices under connected devices.
HUAWEI MateDock2
24