Huawei MTS9300A - 4.3.4 Replacing a Circuit Breaker

Figure 4-4 Removing a rectier
Step 4 Push the locking latch on the new rectier towards the left, and pull out the
handle.
Step 5 Place the new
rectier at the entry to the correct slot.
Step 6 Gently slide the converter into the slot along guide rails until it is engaged. Close
the handle, and push the locking latch towards the right to lock the handle.
Figure 4-5 Installing a
rectier
Step 7 Take o protective gloves.
----End
Follow-up Procedure
Pack the removed component, and return it to local warehouse.
4.3.4 Replacing a Circuit Breaker
Prerequisites
The new circuit breaker is intact.
MTS9300A Telecom Power (Ooredoo, Indonesia,
MTS9304A-HD2002)
User Manual 4 Maintenance
Issue 06 (2021-10-13) Copyright © Huawei Technologies Co., Ltd. 53