Huawei MTS9300A - Replacing a Light

To Next Page

To Previous Page

Figure 4-14 Position of a battery temperature sensor

Step 4 Properly place the new battery temperature sensor and bind it securely with a

cable tie.

Step 5 Reconnect the battery temperature sensor cable to the UIM.

Step 6 Disconnect the ground cable from the ESD wrist strap, and take

o the ESD wrist

strap and ESD gloves.

----End

4.3.9 Replacing a Light

Prerequisites

● You have obtained the cabinet door key, and phillips screwdriver.

● The new light is intact.

Procedure

Step 1 Disconnect the power supply to the light.

Step 2 Remove the damaged light.

Step 3 Install a new light.

MTS9300A Telecom Power (Ooredoo, Indonesia,

MTS9304A-HD2002)

User Manual 4 Maintenance

Other manuals for Huawei MTS9300A