Huawei OceanStor 2600 V3 - Page 107

Table 4-35 Indicators and buttons on the front panel
No. Indicator and
Button
Color State
2 Disk Fault indicator Yellow
l Off: The disk is working properly
or disks cannot be detected in the
RAID group.
l Blinking yellow: The disk is being
located, or the RAID is being
reconstructed.
l Steady yellow: The disk is faulty
or member disks in the RAID
group are abnormal.
3 Disk Active indicator Green
l Off: The disk is not detected or is
faulty.
l Blinking green: Data is being read
from, written to the disk, or
synchronized between disks.
l Steady green: The disk is inactive.
8 Fault diagnosis LED None
l ---: The quorum server is operating
properly.
l Error Code: A fault occurs in
quorum server hardware.
9 Health indicator Red and green
l Steady green: The quorum server
is operating properly.
l Blinking red at 1 Hz: A major
alarm is generated.
l Blinking red at 5 Hz: A critical
alarm is generated.
10 Network port Link
status indicator
Green Each indicator shows the status of an
Ethernet port on the network interface
card (NIC).
l Steady green: The port is properly
connected.
l Off: The port is not in use.
NOTE
If the NIC provides only two network
ports, network port indicators 1 and 2 on
the front panel are used.
OceanStor 2600 V3
Product Description
4 Hardware Architecture
Issue 09 (2019-05-15) Copyright © Huawei Technologies Co., Ltd. 99