Indicators
Table 4-21 describes indicators on a disk module of a powered-on storage system.
Table 4-21 Indicators on a disk module
No. Indicator Status and Description
4 Alarm/Location indicator
of the disk module
l Steady red: The disk module is faulty.
l Blinking red: The disk module is being
located.
l Off: The disk module is working correctly or
hot swappable.
5 Running indicator of the
disk module
l Steady green: The disk module is working
correctly.
l Blinking green: Data is being read and written
on the disk module.
l Off: The disk module is powered off or
powered on incorrectly.
4.4.3 Indicator Introduction
After a disk enclosure is powered on, you can check the current operating status of the disk
enclosure by viewing its indicators.
Indicators on the Front Panel
Figure 4-56 shows the indicators on the front panel of a disk enclosure.
Figure 4-56 Indicators on the front panel of a disk enclosure
1
Running indicator of
the disk module
2 Location/Alarm
indicator of the disk
module
OceanStor 2600 V3
Product Description
4 Hardware Architecture
Issue 09 (2019-05-15) Copyright © Huawei Technologies Co., Ltd. 71
To Next Page
Loading...
