Figure 4-86 Mini SAS HD optical cable
4.9.6 Optical Fibers
The storage system communicates with Fibre Channel switches through optical fibers. One
end of the optical fiber connects to the Fibre Channel host bus adapter (HBA), and the other
end connects to the Fibre Channel switch or the application server. The two ends of the optical
fiber are LC connectors.
Figure 4-87 shows the appearance of optical fibers.
NOTE
l Huawei provides orange OM1 optical fibers and blue OM3 and OM4 optical fibers.
l Huawei provides no longer than 10 m OM1 optical fibers.
l When connecting cables, select proper cables according to site requirements and label information.
l For details about how to bind the cables, see section "Cable Routing and Binding Basics" in
Installation Guide.
Figure 4-87 Optical fibers
OceanStor 2600 V3
Product Description
4 Hardware Architecture
Issue 09 (2019-05-15) Copyright © Huawei Technologies Co., Ltd. 106
To Next Page
Loading...
