No. Indicator Status and Description
3 Indicator of the mini SAS
HD expansion port
l Steady blue: Data is transferred to the
downstream disk enclosure at the rate of 4 x
12 Gbit/s.
l Steady green: Data is transferred to the
downstream disk enclosure at the rate of 4 x 3
Gbit/s or 4 x 6 Gbit/s.
l Steady red: The port is faulty.
l Off: The link to the port is down.
4.2.3 Indicator Introduction
After a controller enclosure is powered on, you can check the current operating status of the
controller enclosure by viewing its indicators.
Indicators on the Front Panel
Figure 4-30 shows the indicators on the front panel of a 2 U 25-disk controller enclosure and
Figure 4-31 shows the indicators on the front panel of a 2 U 12-disk controller enclosure.
Figure 4-30 Indicators on the front panel of a 2 U 25-disk controller enclosure
1
Running indicator of
the disk module
2 Location/Alarm
indicator of the disk
module
3 Location indicator
of the controller
enclosure
4 Alarm indicator of
the controller
enclosure
5 Power indicator/
Power button of the
controller enclosure
- -
OceanStor 2600 V3
Product Description
4 Hardware Architecture
Issue 09 (2019-05-15) Copyright © Huawei Technologies Co., Ltd. 44
To Next Page
Loading...
