No. Indicator Status and Description
14 Power indicator of the
controller
l Steady green: The controller is powered on.
l Blinking green (0.5 Hz): The controller enclosure
is powered on and in the BIOS boot process.
l Blinking green (2 Hz): The controller is in the
operating system boot process, or the controller is
in the power-off process.
l Off: The controller is absent or powered off.
15 Alarm indicator of the
controller
l Steady red: An alarm is generated on the
controller.
l The Alarm indicator blinking red and the Power
indicator blinking green: The controller is being
located.
l Off: The controller is working correctly.
17 Indicator of the mini SAS
HD expansion port
l Steady blue: Data is transferred to the
downstream disk enclosure at the rate of 4 x 12
Gbit/s.
l Steady green: Data is transferred to the
downstream disk enclosure at the rate of 4 x 3
Gbit/s or 4 x 6 Gbit/s.
l Steady red: The port is faulty.
l Off: The link to the port is down.
18 Link/Active indicator of
the GE electrical port
l Steady green: The link to the application server is
normal.
l Blinking green: Data is being transferred.
l Off: The link to the application server is down or
no link exists.
19 Speed indicator of the GE
electrical port
l Steady orange: The data transfer rate between the
storage system and the application server is 1
Gbit/s.
l Off: The data transfer rate between the storage
system and the application server is less than 1
Gbit/s.
4.2.2.3 Power Module
Power modules can ensure that the controller enclosure works correctly in maximum power
consumption mode. The controller enclosure supports both AC and DC power modules.
Appearance
Figure 4-15 and Figure 4-16 show the front view of an AC power module and a DC power
module respectively.
OceanStor 2600 V3
Product Description
4 Hardware Architecture
Issue 09 (2019-05-15) Copyright © Huawei Technologies Co., Ltd. 27
To Next Page
Loading...
