3 Location indicator
of the disk enclosure
4 Alarm indicator of
the disk enclosure
5 Power indicator of
the disk enclosure
- -
Table 4-22 describes the indicators on the front panel of the disk enclosure.
Table 4-22 Description of the indicators on the front panel of a disk enclosure
Module
No. Indicator Status and Description
Disk
module
1 Running indicator of the
disk module
l Steady green: The disk module is
working correctly.
l Blinking green: Data is being
read and written on the disk
module.
l Off: The disk module is powered
off or powered on incorrectly.
2 Alarm/Location indicator of
the disk module
l Steady red: The disk module is
faulty.
l Blinking red: The disk module is
being located.
l Off: The disk module is working
correctly or hot swappable.
System
subrack
3 Location indicator of the
disk enclosure
l Blinking blue: The disk
enclosure is being located.
l Off: The disk enclosure is not
located.
4 Alarm indicator of the disk
enclosure
l Steady red: An alarm is
generated in the disk enclosure.
l Off: The disk enclosure is
working correctly.
5 Power indicator of the disk
enclosure
l Steady green: The disk enclosure
is powered on.
l Off: The disk enclosure is
powered off.
Indicators on the Rear Panel
Figure 4-57 shows the indicators on the rear panel of a disk enclosure.
OceanStor 2600 V3
Product Description
4 Hardware Architecture
Issue 09 (2019-05-15) Copyright © Huawei Technologies Co., Ltd. 72