Huawei OptiXstar HG8140H5 - Indicator Description

3 Indicator Description
Indicator Status Description
Power Steady on The ONT is powered on.
O The power supply is cut o.
PON/LOS See the following table.
LAN1-
LAN4
Steady on The Ethernet connection is in the normal state.
Blinking Data is being transmitted over the Ethernet port.
O The Ethernet connection is not set up.
TEL Steady on The ONT is registered with the softswitch but no
service ows are transmitted.
Blinks twice
a second
The ONT is registered with the softswitch, and data is
being transmitted on the port.
Blinks once
every 2
seconds
The ONT fails to be registered with the softswitch.
O The POTS port is disabled.
Status
No.
PON
Status
LOS
Status
Description
1 O O The ONT is prohibited by the upper-layer
device or blinks abnormally. Contact the
service provider for help.
Huawei OptiXstar HG8140H5
Quick Start for QR code 3 Indicator Description
Issue 01 (2022-12-08) Copyright © Huawei Technologies Co., Ltd. 5