Huawei P smart S User Manual

Please make sure your device has been updated to the latest system version.
Set Device+
Currently, Device+ supports linking phones with the following types of devices. To use this
feature, make sure that devices to be connected support Device+. Before you get started,
enable Bluetooth and Wi-Fi and log in to your HUAWEI ID on your phone. For other devices,
perform the following settings:
• Tablet: Enable Bluetooth and Wi-Fi, and ensure that it is logged in to the same HUAWEI ID
as your phone.
• Computer: Enable Bluetooth and Wi-Fi, and ensure that it is logged in to the same
HUAWEI ID as your device.
• Vision: Enable Bluetooth and Wi-Fi, and ensure that it is logged in to the same HUAWEI ID
as your device.
• Bluetooth device: Some Bluetooth devices (such as Bluetooth headsets) can be linked with
your device via Device+ after establishing a Bluetooth connection.
Show Device+: If Device+ is hidden or cannot be found, go to Control Panel and then to
> Show Device+.
Transfer MeeTime Calls and Audio or Video Being Streamed to Other Devices
When you are making MeeTime calls on your device, watching videos (such as in HUAWEI
Video, Youku, or other video streaming apps), or listening to music, you can transfer any of
these ongoing tasks to another device via Device+ and pick up from where you left o on
the new device. For instance, you can transfer a MeeTime call to your Vision and a video
being streamed to your tablet.
MeeTime: This feature is only available in some countries and regions.
You can select dierent devices to transfer the following tasks:
• Videos: Can be transferred to tablets and Visions.
• MeeTime calls: Can be transferred to Visions.
• Music: Can be transferred to Bluetooth earphones and Visions (either when the screen is on
or o).
1 Swipe down from the upper right edge of your device to display Control Panel. Available
devices will be displayed in the Device+ section. You can also touch to search for
nearby devices manually.
2 Touch a device that you want to transfer the ongoing tasks to.
Essentials
11

Huawei P smart S Specifications

General

Color name	Breathing Crystal
Form factor	Bar
Product color	White
Screen shape	Flat
Pixel density	418 ppi
Display diagonal	6.3 \
Touchscreen type	Capacitive
Display resolution	2400 x 1080 pixels
Native aspect ratio	20:9
Rounded display corners	Yes
Processor cores	4
Processor model	Kirin 710F
Processor family	Hi-Silicon
Processor frequency	2.2 GHz
Coprocessor frequency	1.7 GHz
Processor architecture	ARM Cortex-A73
Coprocessor architecture	ARM Cortex-A53
RAM capacity	4 GB
Compatible memory cards	Nano Memory (NM)
Maximum memory card size	256 GB
Internal storage capacity	128 GB
Flash type	LED
Rear camera type	Triple camera
Front camera type	Single camera
Maximum frame rate	30 fps
Video recording modes	1080p, 2160p
Rear camera resolution	3840 x 2160 pixels
Rear camera aperture number	1.8
Resolution at capture speed	1920x1080@30fps, 3840x2160@30fps
Front camera aperture number	2
Rear camera resolution (numeric)	48 MP
Front camera resolution (numeric)	16 MP
Second rear camera aperture number	2.4
Third rear camera resolution (numeric)	2 MP
Second rear camera resolution (numeric)	8 MP
4G standard	LTE
3G standards	WCDMA
SIM card type	NanoSIM
Wi-Fi standards	802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac)
Bluetooth version	5.0
SIM card capability	-
Mobile network generation	4G
Subscription type	No subscription
USB version	2.0
USB connector type	USB Type-C
Headphone connectivity	3.5 mm
Multimedia Messaging Service (MMS)	Multimedia Messaging Service (MMS) is a standard way to send messages that include multimedia content to and from a mobile phone over a cellular network
Graphics card	Mali G51-MP4
Platform	Android
Operating system installed	Android 10.0
Talk time (3G)	32 h
Battery capacity	4000 mAh
Standby time (3G)	800 h
Standby time (4G)	648 h
Audio formats supported	3GPP, AAC, AMR, FLAC, MIDI, MP3, OGG, WAV
Video formats supported	3GP, MP4

Weight and Dimensions

Depth	7.75 mm
Width	73.2 mm
Height	157.4 mm
Weight	163 g