4
1. Use a positioning
sticker to mark the
installation position for
the pole mounting kit.
2. Install the pole
mounting kit.
Positioning
sticker
Cable hole
Ensure that the arrow on the top of the pole mounting kit points exactly to the middle
point on the top of the positioning sticker.
There are three types of bolts available for installing the pole mounting kit. Choose
the appropriate type of bolts based on the pole diameter.
Bolt
(190 mm)
Bolt (120 mm)
Bolt (160 mm)
Pole Diameter
(105–140 mm)
Pole Diameter
(140–175 mm)
Pole Diameter
(175–210 mm)
3. Install the function module
hanging kit.
4. Install a function module.
5. Install the lithium battery hanging kit.
6. Install a lithium battery.
If two lithium
batteries are required,
install one above the
other. Install the pole
mounting kit after
using a positioning
sticker at the cable
hole in the upper part
of the pole to mark its
installation position.
For the method, see
steps 1 and 2.
7. (Optional) Install the second lithium battery.
To Next Page
Loading...
