Huawei PT530 - Technical Specifications

2
Push-and-pair button and WPS button
The PT530 provides two buttons, the push-and-pair button and WPS button, for secure and
convenient data network setup.

By pressing the push-and-pair button, you can set up secure powerline data connections
between the PT530 and other powerline devices.

By pressing the WPS buttons on the PT530 and any WPS-capable device, you can set up
an encrypted data connection.
Easy Configuration and Management
The PT530 provides password-protected web-based management pages to protect your
personal data.
1.3 Technical Specifications
Interfaces

1 x AC power plug (powerline communication interface)

2 x 2.4 G built-in antennas (wireless communication interface)

2 x RJ45 10/100M Ethernet ports

5 x LED indicators: PWR (power status), LAN1 (network connection status), LAN2
(network connection status), PLC (pair status), and WLAN (wireless connection status)

4 x buttons: reset button, push-and-pair button, WPS button, and power button
Wireless Functions

Wireless connection control (enable/disable)

SSID configuration

Channels: channels 1 through 13 and the automatic channel

Bandwidths: 20 MHz, 40 MHz, and auto

Wi-Fi modes: 802.11b, 802.11g, 802.11n, 802.11b/g, and 802.11b/g/n