Copyright © Huawei Technologies Co., Ltd.
Example
If the CPE fails to access the Internet, run the ping command to preliminarily identify the
problem. To do so:
1. Choose Management > Diagnostics. On the Diagnosis Tools, set to Ping. The Ping
page is displayed.
2. Enter the IP or domain name in the IP address/Domain Name field, for example,
www.google.com.
3. Set Ping Count and Ping Packet Size.
4. Click Run
5. Wait until the ping command is executed.
6. The execution results are displayed in the box.
Diagnostic Tool
Traceroute
− IP address/Domain Name:
To issue a Test, please enter the destination IP address and Domain name here.
− TTL
Time To Live value; in the Traceroute test, please fill in a test value for the packet path
time and check what is the path time that a packet takes to the specified host (Range:
1-30).
Example
If the CPE fails to access the Internet, run the traceroute command to preliminarily identify
the problem. To do so:
1. Choose Management > Diagnostics. On the Diagnosis Tools, set to Traceroute. The
Traceroute page is displayed.
2. Enter the IP or domain name in the IP address/Domain Name field, for example,
www.google.com.
3. Set TTL
4. Click Run
5. Wait until the traceroute command is executed.
6. The execution results are displayed in the box.
4.1.6 Management > System Log
The system log allows you can provide more detail information to your network provider.
System log will not be recorded any individual privacy.
Figure 4‑ 18 System Log
To Next Page
Loading...
