Huawei R2561 - Connecting the Cable

IDU R2561
User Guide
2 Introduction
Issue 01 (2019-02-28)
Copyright © Huawei Technologies Co., Ltd.
5
2.5.2 Connecting the Cable
Step 1 Physical connection as following
1. Connect the Ethernet cable to the RJ45 ports of IDU R2561 and ODU.
2. Connect the Ethernet cable from the computer to one of the IDU R2561's Ethernet Ports.
3. Connect the supplied power adapter to the IDU R2561. The PWR LED shines a steady
green when device ready.
4. Mounting the Device.
Step 2 Connect to the Internet
Physical connection is as following (Refer to Installing Device Instruction).
1. Connect IDU R2561 (WAN) and ODU(RJ45) via Ethernet cable.
2. Use power adapter to connect IDU R2561 (Power)
3. Connect IDU R2561 (ETHERNET PORTS) and PC via Ethernet cable.
4. PC will get default IP 192.168.1.xxx (xxx: 2-254). Open a web browser and go to
192.168.1.1.
Use ONLY the indoor router which supplied with the IDU R2561. Otherwise,
Device may be damaged.
----End