Huawei S Series - 4.1 Data Plan

4.1
Data Plan
Before configuring the switches and router, prepare the following data for use in the next
section.
DataConfiguration Item
 The AC functions as a DHCP server to assign IP addresses to APs.
 Router functions as a DHCP server to assign IP addresses to APs.
DHCP server
56
IP address pool for APs
10.23.100.2 to 10.23.100.254/24
 10.23.101.2 to 10.23.101.254/24
 10.23.102.2 to 10.23.102.254/24
IP address pool for STAs
 Name: sta-pool
 VLANs in the VLAN pool: VLAN 101 and VLAN 102
VLAN pool
Source interface IP
address of the AC
VLANIF 100: 10.23.100.1/24
 Name: ap-group1
 Referenced profiles: VAP profile wlan-vap and regulatory domain
profile domain1
AP group
 Name: domain1
 Country code: CN
Regulatory domain
profile
 Name: wlan-ssid
 SSID name: wlan-net
SSID profile
 Name: wlan-security
 Security policy: WPA2+PSK+AES
 Password: a1234567
Security profile
 Name: wlan-vap
 Forwarding mode: tunnel forwarding
 Service VLAN: VLAN pool
 Referenced profiles: SSID profile wlan-ssid and security profile
wlan-security
VAP profile