5
FAQs
1. How Can I Delete or Clear Configurations and Restore Factory Settings?
Back up the configuration file before restoring factory settings; otherwise,
all configuration data will be deleted.
Restore the factory settings of a switch.
<HUAWEI> reset saved-configuration
Warning: The action will delete the saved configuration in the device.
The configuration will be erased to reconfigure. Continue? [Y/N]:y
Warning: Now clearing the configuration in the device.
Info: Succeeded in clearing the configuration in the device.
<HUAWEI> reboot
Info: The system is now comparing the configuration, please wait.
Warning: The configuration has been modified, and it will be saved to
the next startup saved-configuration file flash:/vrpcfg.zip. Continue?
[Y/N]:n
Info: If want to reboot with saving diagnostic information, input 'N'
and then execute 'reboot save diagnostic-information'.
System will reboot! Continue?[Y/N]:y
2. How Can I Clear Interface Configurations with One Command?
Run the clear configuration this command in the interface view or the clear
configuration interface command in the system view. Then shut down the interface.
The interface shuts down after interface configurations are cleared. To
enable the interface again, run the undo shutdown configuration.
69
To Next Page
Loading...
Need help?
General