● The inverter connects to a phone through a Smart USB-WLAN Adapter
(shortened to WLAN module in this document), Bluetooth module, or a data
cable. You can use the SUN2000 app to view the running information and set
inverter parameters locally.
● You can remotely log in to the FusionSolar Smart PV Management System
over the WebUI or FusionSolar app.
The MBUS communication is applicable to medium-voltage grid connection
scenarios and non-low-voltage public grid connection scenarios (industrial
environment).
Figure 2-3 Networking description
FusionSolar Smart PV Management System
Connection
User Manual (Inverters + SDongleA) 2 Introduction to the Solution
Issue 02 (2021-11-25) Copyright © Huawei Technologies Co., Ltd. 10
To Next Page
Loading...
