Figure 5-20 Registering an account
Step 3 On the home page, click Plants in the upper-right corner to go to the Device
page, and choose Device Management, select the corresponding PV plant, select
Smart Dongle, and click Ser Parameters.
Figure 5-21 Setting export limitation 1
Step 4 Choose Active Power Control and set related parameters.
FusionSolar Smart PV Management System
Connection
User Manual (Inverters + SDongleA) 5 Site Deployment and Commissioning
Issue 02 (2021-11-25) Copyright © Huawei Technologies Co., Ltd. 42
To Next Page
Loading...
