Figure 6-17 Upgrading a device
----End
Over the WebUI
Step 1 Log in to the management system, click Settings in the upper-right corner to go
to the System Settings page, and choose Upgrade Management. On the Device
Upgrade tab page, click Add, and create an upgrade task.
Figure 6-18 Creating an upgrade task
Step 2 Set Upgrade Mode, Device type, Target version, and Device selection, and click
Conrm to upgrade the devices.
If the update after conrmation mode is selected, the device can be updated only after the
user's consent is obtained.
FusionSolar Smart PV Management System
Connection
User Manual (Inverters + SDongleA) 6 Maintenance
Issue 02 (2021-11-25) Copyright © Huawei Technologies Co., Ltd. 61