Huawei SmartLogger3000 Configuration Guide

Parameter Value Range Default Value Description
Switch-o with
0% power limit
Enable/Disable Disable Enables or
disables DO
switch-o. The
default value is
Disable. When
enabled and the
power is limited
to 0%, the DO
performs the
corresponding
action (the hold
time is 5
seconds) if the
current reverse
ow does not
disappear after 5
seconds.
Switch-o
control port
No/DO1/DO2/D
O3
No Set the Switch-
o control port
based on actual
cable connection.
Switch-on
control port
No/DO1/DO2/D
O3
No Set the Switch-
on control port
based on actual
cable connection.
Switch-o state
feedback port
No/DI1/DI2/DI3/
DI4
No Set the Switch-
o state
feedback port
based on actual
cable connection.
Switch-on state
feedback port
No/DI1/DI2/DI3/
DI4
No Set the Switch-
on state
feedback port
based on actual
cable connection.
● Empirical Parameters
Meter
Model
Power
Lowering
Adjustment
Period
Maximum
Protection Time
Description
UMG 0.5s 3s
COUNTIS
E43
0.5s 3s
SmartLogger3000
Export Limitation Conguration Guide 3 Conguting Export Limitation Feature
Issue 04 (2022-10-24) Copyright © Huawei Technologies Co., Ltd. 11

Huawei SmartLogger3000 Specifications

General

Brand	Huawei
Model	SmartLogger3000
Category	Data Loggers
Language	English