Huawei SmartLogger3000 Quick Guide

15
2. Enter https:// XX.XX.XX.XX in the address box of the browser ( XX.XX.XX.XX is the IP address
of the SmartLogger). If you log in to the WebUI for the first time, a security risk warning is
displayed. Click Continue to this website.
•
When the IP address of the WAN port is in the network segment from 192.168.8.1 to
192.168.8.255, set the default gateway to 192.168.8.1 and the IP address of the LAN port to
192.168.3.10. If the connected port is a LAN port, you need to adjust the network
configuration of the PC.
•
It is recommended that the PC be connected to the LAN port on the SmartLogger or the GE
port on the SmartModule. When the PC is connected to the GE port on the SmartModule,
adjust the network configuration of the PC to the configuration mode when the PC is
connected to the LAN port on the SmartLogger.
3. Select a desired language.
4. Select the User Name and enter the Password according to the following table, and then
click Log In.
If…
Then
…
On the login page, the
User Name
is admin by
default.
1.
Enter the initial password Changeme in the Password and click
Log
In.
2.
Change the initial password as prompted and use the admin user
name and new password to log in again.
On the login page, the
User Name
is empty by
default.
Select
installer in the User Name
, set the login password as prompted,
and click
Log In.
• Protect the password by changing it periodically, and keep it secure. If you lose the
password, the device must be restored to its factory settings. The Company will not be held
liable for any losses resulting from improper password management.
• You will be locked out for 10 minutes after five failed password attempts in 5 minutes.
• A dialog box with recent login information is displayed after login. Click OK.
• Update the SmartLogger software as required. Contact the Company's engineers to obtain
the update package and guide and complete the update accordingly.
5. On the Deployment Wizard page, set parameters as prompted. For details, see Help
on the page.
During parameter setting, click Previous, Next, or Skip as required.
6. After the parameters are configured, click Finish.

Huawei SmartLogger3000 Specifications

General

Brand	Huawei
Model	SmartLogger3000
Category	Data Loggers
Language	English