Huawei SUN2000-4.95KTL-JPL1 - Page 25

24
2. Click Monitoring, click the inverter under the SUN2000, click Energy storage, and set related
parameters.
Parameter
Description
Maximum
charge power (kW)
Set the maximum battery charge power.
Maximum
discharge
power (kW)
Set the maximum battery discharge power.
Power grid charging
Enable power grid charging and allow reverse charging for the
power grid.
Maximum grid
charging power
(kW)
Set the maximum reverse charging power for the power grid.
Charging
cutoff SOC
Set the charge cutoff SOC.
Discharging
cutoff SOC
Set the discharge cutoff SOC.
Power grid Charging
cutoff SOC
Set the power grid charge cutoff SOC.
3. Choose Monitoring > Running Param. > Feature Parameters and set related parameters.