AC output port
12 mm
50 mm
Connect the
crimped cable
terminals to the
AC output port.
Tighten the
screws using a
screwdriver to
secure the
cable terminals.
Ensure that the cable
cannot be pulled out after
being crimped.
Recommended:
CRIMPFOX 10S
Route the cable
terminals into the cable holes.
Installing the AC Output Power Cable
3.4
Ensure that the exposed core wire of the AC output power cable is totally inserted into the
cable hole and connected securely. Failing to do so may cause device malfunction or damage.
When connecting the 202 V
self-supporting output power
cable (single-phase three-wire),
connect it to the transformer
first. Otherwise, the device may
be burnt.
7
AC Connection
(101 V Independent Output)
AC Connection
(202 V Independent Output)
Transformer
To Next Page
Loading...
