Huawei SUN2000-40KTL-M3 Quick Guide

8
(Optional) Installing the Smart Dongle
4.5
•
The Smart Dongle is not provided in standard configuration.
•
For details about how to operate the WLAN-FE Smart Dongle SDongleA-05, see SDongleA-
05 Quick Guide (WLAN-FE) .
•
For details about how to operate the 4G Smart Dongle SDongleA-03, see SDongleA-03
Quick Guide (4G) .
•
The quick guide is delivered with the Smart Dongle or can be obtained by scanning the QR
codes.
Smart Dongle port (4G/WLAN-FE)
WLAN-FE 4G
WLAN-FE Smart Dongle (WLAN Communication)
WLAN-FE Smart Dongle (FE Communication)
Install the network cable before installing the Smart Dongle on the solar inverter.

Huawei SUN2000-40KTL-M3 Specifications

General

Max. Efficiency	98.7%
European Efficiency	98.4%
Max. Input Voltage	1100 V
MPPT Operating Voltage Range	200 V - 1000 V
Max. Input Current per MPPT	26 A
Number of MPPTs	4
Rated Output Power	40000 W
Rated AC Voltage	400 V
Rated AC Frequency	50 Hz / 60 Hz
Adjustable Power Factor Range	0.8 leading - 0.8 lagging
Total Harmonic Distortion (THD)	<3%
DC Reverse-Polarity Protection	Yes
AC Overcurrent Protection	Yes
DC Surge Protection	Type II
AC Surge Protection	Type II
Insulation Monitoring	Yes
Residual Current Monitoring	Yes
DC Switch	Yes
Protection Class	IP66
Operating Temperature Range	-25°C to +60°C
Relative Humidity (Operating)	0% - 100%
Cooling	Natural Convection
Max. Apparent AC Power	44000 VA
AC Voltage Range	320 V - 480 V
Operating Altitude	4000 m
Display	LED Indicators
Communication	RS485, WLAN
Weight	43 kg
Max. DC Power	60000 W