Huawei SUN2000-M1 User Manual

25
SmartLogger Networking Scenario
6.6
SmartLogger3000
For details, see the PV Plants Connecting to Huawei Hosting Cloud Quick
Guide (Inverters + SmartLogger3000 + RS485 Networking) . You can scan the
QR codes to obtain the documents.
If the solar inverter connects to batteries, set battery parameters.
Setting Battery Parameters
6.5
1. Log in to the FusionSolar app and choose My >
Device commissioning. The Device commissioning
screen (Refer to 7.1 Device Commissioning.) is
displayed.
2. Choose Power adjustment > Battery control and set
battery parameters, including Charge from grid,
Control mode (Fully fed to grid, TOU(Time-of-use),
Maximum self-consumption), and so on.
1. Access Device commissioning.
Device Commissioning
7.1
Scenario 1: Your phone is not
connected to the Internet.
Scenario 2: Your phone is
connected to the Internet.
7
FAQ
When your phone is
connected to the
Internet, Device
commissioning is not
displayed after you tap
....

Huawei SUN2000-M1 Specifications

General

Model	SUN2000-M1
Manufacturer	Huawei
Max Efficiency	98.6%
Max DC Voltage	1100 V
Number of MPPTs	2
Rated AC Grid Frequency	50 Hz / 60 Hz
Adjustable Power Factor Range	0.8 leading to 0.8 lagging
Total Harmonic Distortion (THD)	<3%
DC Connection	MC4
Cooling	Natural Convection
Protection Degree	IP65
Weight	17 kg
MPPT Efficiency	99.9%
Cooling Method	Natural Convection
Protection Level	IP65
Max Input Current	11A
Max AC Power	5.5 kW
Rated AC Voltage	230V
AC Voltage Range	180 V - 276 V
Operating Temperature Range	-25°C to 60°C
Dimensions	525 x 470 x 146 mm
Maximum Output Power	5.5 kW