20
3. (Optional) Set RS485 parameters.
The RS485 addresses of different inverters must be different.
2. Connect to the inverter WLAN. Log in as installer, and perform Quick settings.
• The initial password for connecting the inverter WLAN is
Changeme
• The initial password of the installer is 00000a
• Use the initial password upon first power-on and change it
immediately after login. To ensure account security, change
the password periodically and keep the new password in
mind. Not changing the initial password may cause password
disclosure. A password left unchanged for a long period of
time may be stolen or cracked. If a password is lost, devices
cannot be accessed. In these cases, the user is liable for any
loss caused to the PV plant.
• To set more parameters, tap Parameter configuration.
To Next Page
Loading...
