Need help?Do you have a question about the Huawei TMC11H and is the answer not in the manual?
General| Category | Power Supply |
|---|---|
| Input Voltage | 100-240V AC |
| Output Voltage | 12V DC |
| Operating Temperature | 0°C to +40°C |
| Model | TMC11H |
| Frequency | 50/60Hz |
| Safety Standards | IEC/EN 60950-1 |
Read instructions and precautions to minimize accident possibility.
Avoid contact with high-voltage power, thunderstorms, optical fiber, dust, batteries, and falling objects.
Ensure grounding, handle ESD sensitive components, and manage batteries carefully.
Use ESD protection, handle boards by panels, and use dedicated packing boxes.
Steps for casting a concrete pad and marking anchor points.
Instructions for drilling holes for base installation with safety precautions.
Steps for installing lifting lugs, tying ropes, and moving the cabinet onto the base.
Steps to secure the cabinet to the base using bolts.
Procedure for installing the RTN 900 unit into the cabinet.
Details the UELP and UFLP specifications for surge protection.
Steps for installing the SLPU board into the cabinet.
Steps for connecting the AC input power cable to the APM30H cabinet.
Steps to connect the DC input power cable to the TMC11H cabinet.
Routing power cables for the RTN 900 within the TMC11H cabinet.
Illustrates routing of various service cables within the cabinet.
Procedure for installing batteries, with warnings about tools and short circuits.
Steps for connecting power cables to the batteries.
Checklist for verifying correct cabinet installation and physical integrity.
Checklist for verifying proper electrical connections, cabling, and labeling.
Procedure for checking power-on status for AC and DC power supplies.
To Next Page
