Need help?Do you have a question about the Huawei UPS2000 Series and is the answer not in the manual?
General| Output Voltage | 220/230/240 V AC |
|---|---|
| Frequency | 50/60 Hz |
| Communication Ports | RS232, USB, SNMP (optional) |
| Output Waveform | Pure Sine Wave |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -15°C to 45°C |
| Relative Humidity | 0% to 95% (non-condensing) |
| Battery Type | Sealed lead-acid battery |
| Typical Backup Time | 5 to 30 minutes depending on load |
| Noise Level | <45 dB |
| Certifications | CE |
Safety guidelines for operating the UPS.
Safety guidelines for handling and operating UPS batteries.
Step-by-step guide for mounting the UPS in a rack.
Step-by-step guide for tower-mounting the UPS.
Instructions for connecting AC and battery power cables.
Essential checks to perform before starting the UPS.
Procedures for starting the UPS in normal and battery modes.
Step-by-step guide to start the UPS in normal operation.
Step-by-step guide to start the UPS using battery power.
Procedures for safely shutting down the UPS.
How to identify UPS status using buzzers and indicators.
Common UPS faults and their troubleshooting measures.
To Next Page