UPS2000-G1-(1 kVA–3 kVA)
User Manual
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1.2 Precautions for Operating Batteries
When operating batteries, observe the following precautions:
Do not open or damage the battery, as the battery electrolyte is harmful to human skin
and eyes. If electrolyte comes into contact with the skin, wash the affected area with
plenty of clean water immediately and go to the hospital for a check.
To prevent explosion and ensure human safety, do not dispose of batteries in fire.
Before operating batteries, get tools insulated, and take off metal articles, such as
watches and rings.
To prevent batteries from starting a fire, do not short-circuit battery terminals.
To avoid damages, transport and hold batteries gently.
1.3 Environment Requirements
Only qualified personnel are allowed to disassemble a UPS. Removed components must be
operated by qualified disposal centers.
1.4 Other Requirements
A UPS can be used to serve resistive-capacitive loads (for example, computers), resistive
loads, and micro-inductive loads. It is recommended that a UPS not be used for pure
inductive loads and pure capacitive loads (for example, motors, air conditioners, and
printers).
Before using a UPS to support the following equipment, consult Huawei for special
requirements on the application, configuration, management, and maintenance of the
UPS:
− Life support equipment
− Facilities such as lifts where adequate care has to be taken to avoid any fatal
eventuality endangering human life
To Next Page
Loading...
