TP482000B V300R002C03 Telecom Power
(TP482000B-N20B1, TP482000B-N20B2,
TP481200B-N20B1, and TP481200B-N20B2)
User Manual
Copyright © Huawei Technologies Co., Ltd.
administrator for an
address.
Apply to the network
administrator for an
address.
2. In Internet Explorer on the PC, enter the SMU IP address. On the login page, enter a user
name and password to log in to the WebUI. The preset user name is admin, and the
preset password is Changeme.
3. On the WebUI, choose Maintenance > Configuration File.
4. Click Scan after Import Local Cabinet a new configuration file, locate the
configuration file on the PC, and click Upload to import the file.
----End
7.2.2 Replacing the LCD
Prerequisites
You have obtained an ESD wrist strap, a pair of ESD gloves, an ESD box or bag, a tool
kit, and the cabinet door key.
The new LCD is intact.
Context
To replace the LCD, you do not need to disconnect the AC input to the power system.
Procedure
Step 1 Connect the ground cable for the ESD wrist strap, and put on the ESD wrist strap and ESD
gloves.
Step 2 Record the positions of cables connected to RJ45 ports on the SMU, and disconnect the cables
from the ports.
Step 3 Unscrew and remove the SMU cover.
To Next Page
Loading...
