UPS5000-E-(50 kVA-300 kVA)
User Manual (50 kVA Power Modules)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure 5-22 Setting ECO mode
Step 4 Manually start the inverter.
After the inverter starts, the UPS still works in bypass mode and the inverter is on standby.
Figure 5-23 shows the power flow displayed on the System Status screen. If the bypass is not
normal, the inverter supplies power immediately. If the inverter is not started, the UPS may be
disconnected.
Figure 5-23 System Status screen
----End
To Next Page
Loading...
