Huawei V100R001 - Page 71

Downloading the FTPS or FTP Network Address Book
On the Address Book page, select Synchronize automatically. The TE30 then automatically
downloads the network address book when it is powered on.
If you have not selected this function, or if you need to update the network address book again,
you can select Update on the Address Book screen.
NOTE
The downloaded address book is saved in vCard format. The file name extension is vcf.
Managing the LDAP Network Address Book
With the LDAP server parameters set correctly, the TE30 can access the LDAP server and search
the LDAP network address book for the required sites.
Configuring the LDAP Server
Step 1 Choose Advanced Settings > Settings > Network > Network Address Book > LDAP
Server. Set the LDAP server parameters by referring to Table 6-6.
Table 6-6 LDAP server parameters
Parameter
Description Setting
Server address Specifies the LDAP server IP address. The default value is
127.0.0.1.
Port Specifies the port used to connect to the
LDAP server.
The default value is 389.
Base DN
(distinguished
name)
Specifies the distinguished name (DN) of
the entry at which a specified search starts.
No default value is set for
this parameter.
Authentication
type
Specifies the type of LDAP server
authentication.
l General: Use the user name and
password for authentication.
l Secured: Perform authentication,
including authentication on digital
certificates, based on the Secure
Sockets Layer (SSL) protocol.
l Anonymous: No authentication is
performed. The LDAP server is
accessible to all users.
The default value is
General.
SSL encryption Specifies whether the SSL protocol is used
to encrypt data streams sent to and received
from the LDAP server.
This parameter is deselected
by default.
HUAWEI TE30 Videoconferencing Endpoint
User Guide 6 Conference
Issue 01 (2013-03-27) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
63