Huawei V100R001 - Page 72

Parameter Description Setting
User name
and
Password
Specifies the user name and password used
for LDAP server authentication.
Their default values are both
admin.
The value can consist of
digits, letters, and special
characters, such as @ # %.
Domain name Specifies the domain name used for LDAP
server authentication.
No default value is set for
this parameter.
Synchronize
automatically
Specifies whether your TE30 regularly
updates the LDAP Address Book entries
in the local address book.
If you select this parameter, you must also
set Automatic update interval and Local
records prevail if duplicates exist.
This parameter is selected by
default.
Local records
prevail if
duplicates exist
Specifies whether the following function is
enabled: If some entries in the network
address book on the LDAP server already
exist in the local address book, these entries
remain unchanged when the local address
book is updated.
This parameter is deselected
by default.
Automatic
update interval
Specifies the interval for updating the
LDAP Address Book entries in the local
address book.
The default value is 24 h.
Step 2 Select Save.
----End
Searching the LDAP Network Address Book for Sites
After the LDAP server parameters are set, your TE30 can communicate with the LDAP server
properly. On the Address Book page, you can search for sites stored in the LDAP network
address book. Table 6-7 lists the online status icons for LDAP sites.
Table 6-7 Online status icons
Icon
Description
Available
Busy
HUAWEI TE30 Videoconferencing Endpoint
User Guide 6 Conference
Issue 01 (2013-03-27) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
64