35
7 Getting Connected
7.1 Mobile Networks
Your mobile phone will be automatically configured to use your network
operator's wireless service (if available) when you turn on the phone for
the first time. Note that the SIM card must be inserted.
7.1.1 Checking the Network Connection
1. Touch > Settings.
2. Under WIRELESS & NETWORKS, touch More... > Mobile
networks.
3. Touch Network operators or Access Point Names to check the
network connection.
Your phone will automatically read the access point settings from
the SIM card (if any). Therefore, do not change the access point
parameters; otherwise, you might not be able to access network
resources.
7.1.2 Turning On the Data Service
1. Touch > Settings.
2. Under WIRELESS & NETWORKS, touch More... > Mobile
networks.
3. Select the Data enabled check box to turn on the data connection.
If you do not need to access a wireless data network, you can clear
the Data enabled check box to save data traffic costs.
To Next Page
Loading...
