3 If the device has not been paired with any Bluetooth device, the system automatically
searches for the Bluetooth devices ready for pairing. You can also touch Select type at
the bottom of the screen to select the target Bluetooth earphones.
If the device has been paired with some Bluetooth devices, the paired devices will be
displayed. Touch Pair and follow the onscreen instructions to pair with the target
Bluetooth earphones.
• Method 2:
1 Put your Bluetooth earphones in pairing mode.
2 Enter the device's app list, swipe up or down on the screen to nd and select Music,
touch
in the lower right corner of the music playback screen, and go to Audio
channel > Add device.
3 Touch Pair, and your watch will automatically search for the devices ready for pairing.
Select the target earphones from the Bluetooth list and follow the onscreen instructions
to complete pairing.
Torch
To make sure there is a suitable option for anywhere you go, there are three torch modes
available on your device: Common mode, Flash mode, and Colour mode.
Common mode
Press the side button on your device to access the app list, or swipe down on the home
screen to access the shortcut menu, and touch
to turn on the torch. The screen will light
up. Touch the screen to turn the torch o. Touch the screen again to turn the torch on again.
Swipe right or press the side button to disable the torch.
Flash mode and Colour mode
The torch on your device supports eight standard colours, custom colours, and adjustment of
ash frequency. You can:
Go to the torch screen on your device, swipe up on the screen to display the settings options,
and set your preferred light colour and ash frequency.
• The torch stays on for ve minutes by default.
• The icon colour may vary depending on the device model.
Assistant
30
To Next Page
Loading...
