5-8
5.2.2 Setting Up a Wireless Connection Using the WPS
Button
Push the WPS button once to quickly set up a wireless connection between the
WS323 and any WPS-capable device. Before you set up a wireless connection using
the WPS button, verify the following:
The wireless network security mode of the WS323 is WPA2-PSK or
WPA-PSK/WPA2–PSK.
The wireless device (laptop, tablet, or mobile phone) to connect to the WS323
is WPS-capable.
Step 1 Press the WPS button on the wireless device to start WPS negotiation.
For details, see the user guide for the wireless device.
Step 2 Within 2 minutes, press and hold the WPS button on the WS323 for 1
second or more. The WPS indicator blinks.
When the WPS indicator on the WS323 is steady on, a connection between the
WS323 and wireless device is set up. The WPS indicator is on for 300 seconds. Then
the WPS indicator turns off.
To Next Page
Loading...
