6-1
6 Configuring WiFi Client Mode
The WS323 can work as a wireless network adapter to provide Internet access for
devices without the WLAN function.
To change the WS323 into WiFi Client mode, press and hold the WS323's WPS
button until the middle signal strength indicator blinks. Then the WS323 will restart
and change into WiFi Client mode.
To set up a wireless connection, press and hold the WS323's WPS button more than
1 second and less than 3 seconds, and press the access point device's WPS button
within 2 minutes. When the connection is set up, the WS323's status indicator turns
from blinking to steady on.
6.1 Setting Internet Access Parameters
Step 1 Launch a browser, enter http://192.168.33.1, and press Enter. In the
Login window, enter admin for both the user name and password, and
click Login.
To protect your router from unauthorized access, change the user name and
password after the first login. For details, see chapter 8.1 "Changing the
Administrator Password of the Web Management Page"
Step 2 Click WiFi Client.
To Next Page
Loading...
