8-3
to its default settings, all custom data and settings will be lost, and the password will
be restored to admin.
Step 1 Log in to the web management page.
Step 2 Click Advance Settings.
Step 3 In the navigation tree, choose Maintenance > Device.
Step 4 Click Reset.
Step 5 Click Restore Default Settings.
Step 6 In the displayed dialog box, click OK.
Using the Reset Button
If you forget the login password to the web management page or could not access the
web management page, use the Reset button on the WS323 rear panel to restore the
WS323 to its default settings. Perform this operation with caution. After the WS323
is restored to its default settings, all custom data and settings will be lost, and the
password will be restored to admin.
Step 1 Press the WS323 On/Off button to power the WS323 on.
Step 2 Press and hold the Reset button for 6 seconds or more.
The WS323 will restart, which will cause temporary network
interruptions.
To Next Page
Loading...
