1-4
Function Operation
Switching
between 2.4
GHz and 5
GHz
Press and hold the WPS button until:
the three
indicator start blinking at the same time to switch
between the 2.4 GHz and 5 GHz working bands.
When the blue
indicator starts blinking, the WS323 is
switched to the 2.4 GHz band.
When the green
indicator starts blinking, the WS323 is
switched to the 5 GHz band.
Switching the
working mode
Press and hold the WPS button until:
the indicator starts blinking to switch to WiFi Router
mode.
the indicator starts blinking to switch to WiFi Client
mode.
the indicator starts blinking to switch to WiFi Repeater
mode.
WPS is a computing standard that attempts to automate secure wireless
network setup and connection. The WPS function lets you securely add
wireless clients to a WLAN without entering the user name and password.
1.3 Indicators
Table 1-3 Lists the WS323 indicators and their meanings.
To Next Page
Loading...
Need help?
General
