1-3
Table 1-1 WS323 ports and buttons
Item Functions
Power plug Can be plugged into a power socket.
WPS button Quickly sets up a wireless connection or changes WS323's
working mode.
Reset button After the WS323 is powered on, press and hold the Reset button
for 6s or more to restore the WS323 to its factory settings.
Restoring the WS323 to its factory settings will erase your
user-defined data.
Status
indicator
Shows the WS323 working status. For details, see section 1.2.2
Indicators.
Signal
strength
indicator
Shows the network signal strength. For details, see section 1.2.2
Indicators.
ETH port Connects the WS323 to a network device.
Table 1-2 Using the WPS Button for Quick Configuration
Function Operation
WPS
connection
Press and hold the WPS button more than 1 second and less than
3 seconds, and press the wireless client's WPS button within 2
minutes.
When the
status indicator turns from blinking to steady on,
the connection is set up.
To Next Page
Loading...
Need help?
General
