Time scale
The time display can be displayed in various formats (hh, min, sec).
2
nd
set-point
Corresponds to the Function F4 in the Function-no. menu.
The input of a 2
nd
or alternative set-point is done in the same way as the normal
set-point under the menu point set-point. This second set-point is activated with an
external control signal (Function F28) or through a watchdog event
User menu - select
A description on this menu point can be found in the chapter on Compact menu.
User menu - config.
A description on this menu point can be found in the chapter on Compact menu.
To Next Page
Loading...
