Huffy cruiser - Rear Fender Assembly

13
Assembly
Attach Lower Fender Braces:
1. Line up the Rear Fender Braces
A
with the Frame Mounting Tabs
B
.
2. Insert each lower mounting Bolt
C
into the Frame Mounting Tabs
B
and
tighten securely. Make sure fender is
centered over tire.
Tighten Top Fender Mount:
Note: Top Fender mount is loose to allow
installation.
3. Tighten Bolt
D
and Nut
E
securely.
Make sure fender is centered over tire.
Note: Ensure wheel spins freely without con-
tacting frame or fender.
Rear Fender Assembly
C
B
A
D
E
NOTE: See Torque Chart for recommended torque.