Huffy cruiser - Accessories (Various Models)

19
Accessories (various models)
A
B
C
D
INSULATED BAG INSTALL:
1. Attach Bag
A
to
Handlebar by sliding the
Back Brace
B
securely
into the Bracket Slots
C
.
2. If needed, adjust Brackets
C
by loosening Screws
D
, and moving Brackets
closer together or further
apart so that Bag  ts into
the Brackets Slots.
3. Tighten Screws
D
Securely.
B
A
LUGGAGE RACK ADJUSTMENT:
1. Loosen Adjustment Knob
A
by turning
counter clockwise.
2. Slide Adjustable Rack
B
into position
3. Tighten with Adjustment Knob
A
by turning
clockwise.
NOTE: Do not over-tighten. This will damage the
Knob.
CUP HOLDER VARIOUS:
NOTE:
• Bracket may be pre-
installed and only need to
be adjusted.
• Be careful not to scratch
painted handlebars.
Installation:
1. Attach Cup
A
to
Bracket
B
using two
Screws
C
. Tighten
securely.
2. Position Cup and Bracket level on Handlebar and attach Clamp Half
B
with Screw(s)
D
. Tighten securely.
NOTE: Slide Clamp halves slide together at Notch
E
and attach with one Screw.
A
A
C B D
C
E
B
D
D
Accessories