Huffy KD58C-LCD - Front Light Assembly; Front Light Installation Steps

19
Front Light Assembly
Assembly
A
D
C
B
A
STEPS:
1. Attach Light to Fork with one Screw/
Washer/Nut
A
- Tighten securely.
2. Connect Front Light Wire Connector
B
by matching up the arrows
C
on
each connector then rmly and securely
connect wire lead from Front Light
B
to Connector extending from underside
of the Downtube
D
as shown.
NOTE: Be sure that Arrows
C
on each connector are aligned before making
connection to avoid damage to pin connectors.