Audio Steering Wheel Controls
If your vehicle has this feature, some audio controls can
be adjusted at the steering wheel. They include the
following:
g (OnStar
®
/Mute): Press this button to interact with
the OnStar system. See the OnStar
®
System on
page 2-48 in this manual for more information.
PROG (Program): Press this button to play the stations
that are programmed on the radio preset pushbuttons.
The radio will go to the first preset station, play for a few
seconds, then go to the next preset station. Press this
button again to stop scanning. The radio will only
scan preset stations with a strong signal that are in the
selected band.
When a cassette tape is playing, press this button to
play the other side of the tape.
When a CD is playing in the CD changer, press this
button to go to the next available CD, if multiple CDs
are loaded.
Q SOURCE R: Press this button to switch between
FM1, FM2, AM, or XM1, or XM2 (if equipped), or a
cassette tape or CD. The cassette or CD must be loaded
to play. Available loaded sources are shown on the
display as a tape or a CD symbol.
Q SEEK R: Press the up or the down arrow to go to
the next or to the previous radio station and stay
there. The radio will only seek stations with a strong
signal that are in the selected band.
When a cassette tape or CD is playing, press the up or
the down arrow to fast forward or reverse.
Q VOLR (Volume): Press the up or the down arrow
to increase or to decrease the volume.
3-110
To Next Page
Loading...
Need help?
General
