Securing a Child Restraint in a Rear
Seat Position
If your child restraint is equipped with the LATCH
system, see Lower Anchors and Tethers for Children
(LATCH) on page 1-43.
If your vehicle is an SUT, there are no top tether
anchors in the 2nd row outside seating positions. Do not
secure a child seat in these positions if a national or
local law requires that the top tether be anchored, or if
the instructions that come with the child restraint
say that the top tether must be anchored. See Lower
Anchorages and Top Tethers for Children (LATCH
System) if the child restraint has a top tether.
If your child restraint does not have the LATCH system,
you will be using the lap-shoulder belt to secure the
child restraint in this position. Be sure to follow the
instructions that came with the child restraint. Secure
the child in the child restraint when and as the
instructions say.
1. Put the child restraint on the seat.
2. Pick up the latch plate, and run the lap and shoulder
portions of the vehicle’s safety belt through or
around the restraint. The child restraint instructions
will show you how.
3. Buckle the belt. Make sure the release button is
positioned so you would be able to unbuckle the
safety belt quickly if you ever had to.
1-52
To Next Page
Loading...
Need help?
General
