Capacities and Specifications
The following approximate capacities are given in English and metric. Please refer to Recommended Fluids and
Lubricants on page 6-12 for more information.
Capacities and Specifications
Application
Capacities
English Metric
Cooling System
1
17.2 qt 16.3 L
Engine Oil with Filter
2
6.0 qt 5.7 L
Fuel Tank 32.0 gal 121.0 L
Transfer Case Fluid 2.0 qt 1.9 L
Wheel Nut Torque 140 lb ft 190 Y
1
After refill, the level must be rechecked. See Cooling System on page 5-29.
2
After refill, the level must be rechecked. Add enough engine oil so that the fluid is within the proper operating
range. See Engine Oil on page 5-14.
All capacities are approximate. When adding, be sure to fill to the appropriate level, as recommended in
this manual.
Engine Specifications
Engine VIN Code Transmission Spark Plug Gap
VORTEC™ 6.0L V8 U Automatic 0.040 inches (1.01 mm)
5-124
To Next Page
Loading...
Need help?
General
