80
Position Format
(Advanced)
Position Format selects the format of the latitude and longitude position display.
This menu choice is available only when in Advanced User Mode (see Setup Menu
Tab: User Mode).
To change the Position Format setting:
1. Make sure you are in Advanced User Mode, then highlight Position Format on
the Setup menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Position Format.
(dd.ddddd°, dd°mm.mmm', or dd°mm'ss", Default = dd°mm.mmm')
Time Format
(Advanced, International only)
Time Format changes the time format used by the unit This menu choice is available only
when in Advanced User Mode (see Setup Menu Tab: User Mode). International Models
only. Time Format selects a 12 hour or 24 hour format for the time of day displayed when
Time + Date is selected as a Digital Readout on the Sonar View (see Select Readouts).
To c
hange the Time Format:
1. Make sure you are in Advanced User Mode, then highlight Time Format on the
Setup menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Time Format.
(12 hour, 24 hour, Default = 12 hour)
To Next Page