Hunter Douglas Duette User Manual (English)

Other manuals for Hunter Douglas Duette

Installation Operation Care40 pages

Owner's Guide28 pages

Questions and Answers:

K
Kristen ConnerSep 6, 2025
What to do if Hunter Douglas Duette Indoor Furnishing shade is hard to raise or lower?
- C
  Caleb SnyderSep 6, 2025
  If your Hunter Douglas Indoor Furnishing shade is hard to raise or lower, make sure that the shade fabric is not caught between the installation bracket and the headrail. Check that the headrail and installation brackets are level and aligned in the window. Shim the installation brackets to level the headrail, if necessary. If hold-down brackets are used, make sure they have been released before operating the shade.
H
Heidi GonzalesSep 7, 2025
Why Hunter Douglas Duette shade raises or lowers unevenly?
- A
  Alicia HuntSep 8, 2025
  If your Hunter Douglas Indoor Furnishing shade raises or lowers unevenly, check that the headrail and installation brackets are level and aligned. Shim the installation brackets to level the headrail, if necessary. Check to see if there is an obstruction in the shade’s path. If a shade hits an obstruction as it is lowered it may become misaligned. This may cause the shade to be angled or tilted when fully raised. Try lowering the shade completely, then raising it to allow it to self-correct. Adjust the shade.
H
Hannah FriedmanSep 9, 2025
What to do if Hunter Douglas Duette shade will not fit into the installation brackets?
- S
  Steven NealSep 9, 2025
  If the Hunter Douglas Indoor Furnishing shade will not fit into the installation brackets, check that the installation brackets are level and aligned. Shim the installation brackets to level the headrail, if necessary. Be sure the heads of the screws are flush against the installation bracket. Check that the headrail is completely inserted into the installation brackets.
B
Brittany ReynoldsSep 12, 2025
How to rethread the ferrule on Hunter Douglas Duette Indoor Furnishing?
- P
  pruizSep 12, 2025
  To rethread the ferrule on Hunter Douglas Indoor Furnishing, thread the end of the cord into the tapered end of the ferrule. Loop the cord around the ferrule and back through the tapered end. Make sure the loop fits into the groove on the side of the ferrule.
A
annahernandezSep 12, 2025
Why is my Hunter Douglas Duette shade hard to raise or lower?
- C
  Christopher ChungSep 12, 2025
  The shade might be difficult to raise or lower if the fabric is caught between the installation bracket and the headrail. Also, ensure the headrail and installation brackets are level and aligned; shim the brackets if needed. If hold-down brackets are used, release them before operating the shade.
J
Jennifer RuizSep 14, 2025
What to do if lift cords hang from the bottom rail of my Hunter Douglas Duette?
- C
  Cassandra RiveraSep 14, 2025
  If lift cords are hanging from the bottom rail, tape the extra cord length to the bottom rail or place it into the groove on the bottom rail for future adjustments.

Hunter Douglas Duette Specifications

General

Product Type	Honeycomb Shades
Energy Efficiency	High
Cell Size	3/8", 3/4", 1 1/4"
Operating Systems	EasyRise, LiteRise, PowerView Motorization, UltraGlide
Specialty Shapes	Available
Opacity	Sheer, semi-sheer, semi-opaque, opaque
Lift Systems	Cordless, Motorized
Material	Fabric
Insulation	Excellent
Privacy	Adjustable
Fabric Options	Variety of textures and colors
Customization	Width, height, fabric, color, lift system